Getting Started
Getting Started¶
This section shows how to use ANTA with basic configuration. All examples are based on Arista Test Drive (ATD) topology you can access by reaching out to your preferred SE.
Installation¶
The easiest way to install ANTA package is to run Python (>=3.9) and its pip package to install:
pip install anta
For more details about how to install package, please see the requirements and installation section.
Configure Arista EOS devices¶
For ANTA to be able to connect to your target devices, you need to configure your management interface
vrf instance MGMT
!
interface Management0
description oob_management
vrf MGMT
ip address 192.168.0.10/24
!
Then, configure access to eAPI:
!
management api http-commands
protocol https port 443
no shutdown
vrf MGMT
no shutdown
!
!
Create your inventory¶
ANTA uses an inventory to list the target devices for the tests. You can create a file manually with this format:
anta_inventory:
hosts:
- host: 192.168.0.10
name: spine01
tags: ['fabric', 'spine']
- host: 192.168.0.11
name: spine02
tags: ['fabric', 'spine']
- host: 192.168.0.12
name: leaf01
tags: ['fabric', 'leaf']
- host: 192.168.0.13
name: leaf02
tags: ['fabric', 'leaf']
- host: 192.168.0.14
name: leaf03
tags: ['fabric', 'leaf']
- host: 192.168.0.15
name: leaf04
tags: ['fabric', 'leaf']
You can read more details about how to build your inventory here
Test Catalog¶
To test your network, ANTA relies on a test catalog to list all the tests to run against your inventory. A test catalog references python functions into a yaml file.
The structure to follow is like:
<anta_tests_submodule>:
- <anta_tests_submodule function name>:
<test function option>:
<test function option value>
You can read more details about how to build your catalog here
Here is an example for basic tests:
# Load anta.tests.software
anta.tests.software:
- VerifyEOSVersion: # Verifies the device is running one of the allowed EOS version.
versions: # List of allowed EOS versions.
- 4.25.4M
- 4.26.1F
- '4.28.3M-28837868.4283M (engineering build)'
- VerifyTerminAttrVersion:
versions:
- v1.22.1
anta.tests.system:
- VerifyUptime: # Verifies the device uptime is higher than a value.
minimum: 1
- VerifyNTP:
- VerifySyslog:
anta.tests.mlag:
- VerifyMlagStatus:
- VerifyMlagInterfaces:
- VerifyMlagConfigSanity:
anta.tests.configuration:
- VerifyZeroTouch: # Verifies ZeroTouch is disabled.
- VerifyRunningConfigDiffs:
Test your network¶
ANTA comes with a generic CLI entrypoint to run tests in your network. It requires an inventory file as well as a test catalog.
This entrypoint has multiple options to manage test coverage and reporting.
Usage: anta [OPTIONS] COMMAND [ARGS]...
Arista Network Test Automation (ANTA) CLI.
Options:
--version Show the version and exit.
--log-file FILE Send the logs to a file. If logging level is
DEBUG, only INFO or higher will be sent to
stdout. [env var: ANTA_LOG_FILE]
-l, --log-level [CRITICAL|ERROR|WARNING|INFO|DEBUG]
ANTA logging level [env var:
ANTA_LOG_LEVEL; default: INFO]
--help Show this message and exit.
Commands:
check Commands to validate configuration files.
debug Commands to execute EOS commands on remote devices.
exec Commands to execute various scripts on EOS devices.
get Commands to get information from or generate inventories.
nrfu Run ANTA tests on selected inventory devices.
Usage: anta nrfu [OPTIONS] COMMAND [ARGS]...
Run ANTA tests on selected inventory devices.
Options:
-u, --username TEXT Username to connect to EOS [env var:
ANTA_USERNAME; required]
-p, --password TEXT Password to connect to EOS that must be
provided. It can be prompted using '--
prompt' option. [env var: ANTA_PASSWORD]
--enable-password TEXT Password to access EOS Privileged EXEC mode.
It can be prompted using '--prompt' option.
Requires '--enable' option. [env var:
ANTA_ENABLE_PASSWORD]
--enable Some commands may require EOS Privileged
EXEC mode. This option tries to access this
mode before sending a command to the device.
[env var: ANTA_ENABLE]
-P, --prompt Prompt for passwords if they are not
provided. [env var: ANTA_PROMPT]
--timeout FLOAT Global API timeout. This value will be used
for all devices. [env var: ANTA_TIMEOUT;
default: 30.0]
--insecure Disable SSH Host Key validation. [env var:
ANTA_INSECURE]
--disable-cache Disable cache globally. [env var:
ANTA_DISABLE_CACHE]
-i, --inventory FILE Path to the inventory YAML file. [env var:
ANTA_INVENTORY; required]
--tags TEXT List of tags using comma as separator:
tag1,tag2,tag3. [env var: ANTA_TAGS]
-c, --catalog FILE Path to the test catalog YAML file [env
var: ANTA_CATALOG; required]
-d, --device TEXT Run tests on a specific device. Can be
provided multiple times.
-t, --test TEXT Run a specific test. Can be provided
multiple times.
--ignore-status Exit code will always be 0. [env var:
ANTA_NRFU_IGNORE_STATUS]
--ignore-error Exit code will be 0 if all tests succeeded
or 1 if any test failed. [env var:
ANTA_NRFU_IGNORE_ERROR]
--hide [success|failure|error|skipped]
Group result by test or device.
--help Show this message and exit.
Commands:
json ANTA command to check network state with JSON result.
table ANTA command to check network states with table result.
text ANTA command to check network states with text result.
tpl-report ANTA command to check network state with templated report.
To run the NRFU, you need to select an output format amongst [“json”, “table”, “text”, “tpl-report”]. For a first usage, table is recommended. By default all test results for all devices are rendered but it can be changed to a report per test case or per host
Default report using table¶
anta nrfu \
--username tom \
--password arista123 \
--enable \
--enable-password t \
--inventory .personal/inventory_atd.yml \
--catalog .personal/tests-bases.yml \
table --tags leaf
╭────────────────────── Settings ──────────────────────╮
│ Running ANTA tests: │
│ - ANTA Inventory contains 6 devices (AsyncEOSDevice) │
│ - Tests catalog contains 10 tests │
╰──────────────────────────────────────────────────────╯
[10:17:24] INFO Running ANTA tests... runner.py:75
• Running NRFU Tests...100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40/40 • 0:00:02 • 0:00:00
All tests results
┏━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━┓
┃ Device IP ┃ Test Name ┃ Test Status ┃ Message(s) ┃ Test description ┃ Test category ┃
┡━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━┩
│ leaf01 │ VerifyEOSVersion │ success │ │ Verifies the device is running one of the allowed EOS version. │ software │
│ leaf01 │ VerifyTerminAttrVersion │ success │ │ Verifies the device is running one of the allowed TerminAttr │ software │
│ │ │ │ │ version. │ │
│ leaf01 │ VerifyUptime │ success │ │ Verifies the device uptime is higher than a value. │ system │
│ leaf01 │ VerifyNTP │ success │ │ Verifies NTP is synchronised. │ system │
│ leaf01 │ VerifySyslog │ success │ │ Verifies the device had no syslog message with a severity of warning │ system │
│ │ │ │ │ (or a more severe message) during the last 7 days. │ │
│ leaf01 │ VerifyMlagStatus │ skipped │ MLAG is disabled │ This test verifies the health status of the MLAG configuration. │ mlag │
│ leaf01 │ VerifyMlagInterfaces │ skipped │ MLAG is disabled │ This test verifies there are no inactive or active-partial MLAG │ mlag │
[...]
│ leaf04 │ VerifyMlagConfigSanity │ skipped │ MLAG is disabled │ This test verifies there are no MLAG config-sanity inconsistencies. │ mlag │
│ leaf04 │ VerifyZeroTouch │ success │ │ Verifies ZeroTouch is disabled. │ configuration │
│ leaf04 │ VerifyRunningConfigDiffs │ success │ │ │ configuration │
└───────────┴──────────────────────────┴─────────────┴──────────────────┴──────────────────────────────────────────────────────────────────────┴───────────────┘
Report in text mode¶
$ anta nrfu \
--username tom \
--password arista123 \
--enable \
--enable-password t \
--inventory .personal/inventory_atd.yml \
--catalog .personal/tests-bases.yml \
text --tags leaf
╭────────────────────── Settings ──────────────────────╮
│ Running ANTA tests: │
│ - ANTA Inventory contains 6 devices (AsyncEOSDevice) │
│ - Tests catalog contains 10 tests │
╰──────────────────────────────────────────────────────╯
[10:20:47] INFO Running ANTA tests... runner.py:75
• Running NRFU Tests...100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40/40 • 0:00:01 • 0:00:00
leaf01 :: VerifyEOSVersion :: SUCCESS
leaf01 :: VerifyTerminAttrVersion :: SUCCESS
leaf01 :: VerifyUptime :: SUCCESS
leaf01 :: VerifyNTP :: SUCCESS
leaf01 :: VerifySyslog :: SUCCESS
leaf01 :: VerifyMlagStatus :: SKIPPED (MLAG is disabled)
leaf01 :: VerifyMlagInterfaces :: SKIPPED (MLAG is disabled)
leaf01 :: VerifyMlagConfigSanity :: SKIPPED (MLAG is disabled)
[...]
Report in JSON format¶
$ anta nrfu \
--username tom \
--password arista123 \
--enable \
--enable-password t \
--inventory .personal/inventory_atd.yml \
--catalog .personal/tests-bases.yml \
json --tags leaf
╭────────────────────── Settings ──────────────────────╮
│ Running ANTA tests: │
│ - ANTA Inventory contains 6 devices (AsyncEOSDevice) │
│ - Tests catalog contains 10 tests │
╰──────────────────────────────────────────────────────╯
[10:21:51] INFO Running ANTA tests... runner.py:75
• Running NRFU Tests...100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40/40 • 0:00:02 • 0:00:00
╭──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ JSON results of all tests │
╰──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
[
{
"name": "leaf01",
"test": "VerifyEOSVersion",
"categories": [
"software"
],
"description": "Verifies the device is running one of the allowed EOS version.",
"result": "success",
"messages": [],
"custom_field": "None",
},
{
"name": "leaf01",
"test": "VerifyTerminAttrVersion",
"categories": [
"software"
],
"description": "Verifies the device is running one of the allowed TerminAttr version.",
"result": "success",
"messages": [],
"custom_field": "None",
},
[...]
]
You can find more information under the usage section of the website